Although Quixo may utilize a multitude of different inks we are most likely to use just two or three for printing on garments. Because water based and plastisol inks are the two most widely used for garment printing, we will primarily on those.
Because of its high opacity and ability to sit on screen for long periods of time without drying, plastisol ink is arguably the most widely used garment ink in the United States. Other factors such as durability, flexibility, and versatility have also led to the popularity of plastisol ink. Specialty plastisols are also widely used and often offered as additives, bases or in premixed containers that are ready for use. Specialty inks include but are not limited to:
- High density – Makes the ink com e straight up off of the garment with no arching.
- Puff – Makes the ink pop off of the garment with an arch so that it looks puffy and soft.
- Soft hand – Reduces the viscosity of the ink and allows for a softer print. May also reduce opacity.
- Reducer – Thins the ink and reduces both viscosity and opacity; very similar to soft hand.
- Suede – Dulls the print and gives it a flat, low gloss finish.
With all additives and bases it is a good idea to mix small batches and test them before you alter your larger containers of ink.
Water Based Ink
Outside of the United States it could be argued that water based inks are the most popular garment inks in the world. Water based ink is popular because it saturates the fibers of the garment and in essence dyes the garment rather than resting on top of the fibers like plastisol. Because of this, the print is usually softer and more solid than with plastisol. While there are some distinct advantages to water based inks there are also some serious pitfalls that one should be prepared for.
- Low opacity – Because they are thinner and do not retain their base when cured, water based inks can often have issues achieving high opacity. Some water based ink manufactures will claim “high-opacity” but will often forgo softness to achieve it. When this is done you may find that you can achieve the same or perhaps a better look and feel with a thinned plastisol.
- Drying – Because water based inks cure via simple evaporation, they can often be problematic if used in very arid environments. Conversely, if water based inks are used in very humid environments you may never get them dry without a proper heat source.
- Custom Color Matching – While custom colors can absolutely be made with water based inks, it is important to remember that they are semitransparent and may not appear the same when printed.
In the end, water based inks are a great choice for printers of all skill levels and should always be considered a viable option. As long as you know what to watch for and how to properly use them , water based inks can give you some of the best looking prints.
Discharge ink is offered in both water based and plastisol varieties and works well both ways. Discharge inks work by removing the dye used to color the garment and replacing it with the pigmented ink color. These inks have gained popularity in recent years because they allow a printer to work on dark garments without the need for under basing. Important things to remember about discharge inks include:
- Garment Selection – Discharge inks will only work on 100% cotton garments. Additionally, printers should always let their garment supplier know if they are going to be using the garments for discharge as some garments are over-dyed and may cause issues during printing.
- Odor – Some discharge inks will put off a heavy odor and should be used only in a well-ventilated workspace.
- Curing – Discharge inks are activated by the heat of the dryer and must be dried thoroughly in order to work properly.
As with any ink system, if you gather the proper information and do the proper testing, discharge inks can be a great addition to your print shop and may even save you time and money.